|Size (L x W x H)||4 cm x 4 cm x 19 cm|
- Indoor and outdoor concrete structures
- Precast concrete structures
- Cement bottoming
- Drainage pipes
- Toilet sealing and leaking
- tone, metal pipes, wood products, bamboo products
- Other sealing and leaking construction.
100% Original LKB Product
Scope of application:
Indoor and outdoor concrete structures, precast concrete structures, cement bottoming, drainage pipes, toilet sealing and leaking, and stone, metal pipes, wood products, bamboo products and other sealing and leaking construction.
1. Identify the leaks and ensure that the surface is clean, dry and free of loose structures. If there are cracks larger than 3mm, please fill the joints first;
2. Pour the product to the leaking point and apply evenly. Brush horizontally and then vertically to make it evenly. For areas prone to water leakage, you can wait for the first coating to dry completely, and then repeat the operation 1-2 times.
3. After 24 hours (you can extend the drying time appropriately), it can touch the water.
Reference dosage for flat painting construction: 300-500ml/m². The dosage varies according to the situation of the base surface, and the dosage is subject to the actual construction area. In order to achieve the effect, paint it again about 24 hours after the first application.
1. This product must not be exposed to water before it is dry; otherwise it will appear white and fall off;
2. Each time you brush it should not be too thick or it will be difficult to dry;
3. When the sealing and plugging glue cannot be used up at one time, please be sure to tighten the bottle cap to save;
4. Store in a cool, dry, out of reach of children. This product is not edible.
Shelf life: two years (store at room temperature and avoid light)
1 x LKB Water Proofing Gel