RM6.90 RM12.00
268G Drain Cleaner Agents Foaming Unclog Drain Powder Pipeline Basin Clog Remover Ubat Sinki Paip Tandas Tersumbat
Price RM6.90 RM12.00
Product SKU 268g
Availability In Stock
Quantity
Description

*Low temperature + rapid foaming
*Drainage pipe dredging and cleaning
*Suitable for drainage of kitchen and bathroom

This product can quickly fill the pipeline with effective substances and adhere to the pipe wall, quickly decompose the ingredients, and fully decompose the blockage; a variety of surfactant compound formulas, while removing dirt, can also achieve fast purification, deworming, and odor removal.

Instructions:

Water basin, vegetable basin, mop, floor drain (kitchen, shower room, etc.) sewer dredging
1: Add some of the water into pipe (either normal temperature or warm water). There is no need to add water if the water level over nozzle and the water outside the pipe port needs to be removed.
2: Pour 1-2 bottle caps (approximately 40g for a bottle cap) of this product each time for 13 minutes, and pour directly into the pipe. After 1 or 2 minutes, rinse with 2000ml water (warm water is recommended for serious oil clogging. Significantly improve the reaction and resolution ability of dredge agents).
3: Wait for 30 minutes and 1 hour, rinse water, and repeat the step if it is still not cleared.

Toilet, pit dredging
1: Before use, use a mop to suck out the water in the toilet as much as possible (the water that exceeds the normal water level must be removed, which can greatly improve the reaction and resolution ability of the dredge agent).
Step 2: Pour 200-600g of this product into the pipe. Rinse with plenty of water after 1-2 minutes (warm water is recommended for serious oil clogging, which can greatly improve the reaction and dissolution ability of the dredge agent)
The third step: After waiting for 1-2 hours, test the dredging effect with a lot of water. If it still fails, you can repeat the step.

Main pipe dredging
1: Add some water (either normal temperature or warm water) to the pipeline. There is no need to add water if the water level over nozzle and the water outside the pipe port needs to be removed.
2: Pour 200-600 grams of this product into the pipeline, and rinse it in with a lot of water about 1-2 minutes (warm water is recommended for serious oil clogging, which can greatly improve the reaction and resolution ability of the dredge agent).
3: After 1-2 hours, use a lot of water to test the dredging effect. If it still fails, you can repeat the step.

Maintenance and deodorization (purification, removal of peculiar smell, deworming)
Pour about 50g of this product into the pipe and rinse with water after 10 minutes.


Precautions
1. Do not touch the skin or take it by mouth, and keep away from children!
2. Before using the product, the water level in the pipe cannot pass through the pipe opening. When this product dissolves, it will heat up instantly, and a large amount of foam will be generated. It may overflow the pipe opening and cause splashing.

[[Wear goggles and rubber gloves during the entire operation. ]]